Windows nt file system mac os

Primary Sidebar
Contents:


  1. The best ways to format an external drive for Windows and Mac
  2. Share your voice
  3. Popular Topics
  4. The best ways to format an external drive for Windows and Mac - CNET

You only need to run it once for each new ntfs disk. It is also important that the HD has been safely removed, since NTFS contains a flag to notice if the disk was safely removed or not, not allowing to mount it in write mode with the native OSX driver something similar happens under Linux. In case it happens you just need to plug it into a windows PC and safely remove the HD so it cleans that flag.

Looks great but doesnt work on my Moutain Lion. Now when I connect it, i see it briefly show up in Volumes, but then it disappears. I can see it in disk utility, the drive mounts, but the partition cannot be mounted. The script works fine but regularly my directories appear empty I know the data is there, I check with other OS. Do you have an idea on my problem? Apart from the workaround suggested in previous post, you can run. Another observation, which might be helpful: I used ntfs formated hdd successfully until today. It took me a while to figure out what happened, eventually dmesg gave away the culprit:.

Will not be able to remount read-write. Mount in Windows. After performing the disk check under Windows, the disk mounted normally. So make sure the disk is clean, otherwise it does not get the write permissions on OSX.


  1. How To Write To Windows NTFS Drives In Mac OS X 10.6 “Snow Leopard”.
  2. Why Can’t Windows Read Mac Drives?!
  3. Microsoft NTFS for Mac by Paragon Software.
  4. java applet mac os lion;

Indeed, this allows me to write to NTFS formatted disks. Uhm, very strange. I will have a look at it for a few more days.

The best ways to format an external drive for Windows and Mac

I hope the problems are finally gone. Quit Terminal and Now, just unmount and re-mount the disk. This means that the partition will not show up on your desktop. However, you can access it normally through Finder by doing the following: Note for anybody who might have encountered initial issues like me:. I tried first the manual solutions posted above, including vifs and the UUID vs. LABEL choice. The disc would continue to automount and be accessible in the Finder, without write permission.

Share your voice

I just copied around GB of data successfully, and checked some files for function without any problem. When I copy and just open the files, they are correct, but the issue happens after I disconnect the hdd and reconnect again.

Did everything. It did not show up in the terminal as well. All other partitions were visible. Here is the setup and step: NTFS Drive with 4 partitions. Upon connecting it to the laptop, I can see 4 drives on my desktop. Grepped the UUID of one partition and added it to the fstab file. Ejected the drive. Connected it back again. This is expected I guess. Same here, it worked previously somehow, all of a sudden after an OS update maybe?

I successfully got write permission to work on my external HD. I then copied a file from my computer to a folder in the HD, the copy was successful, however all existing contents of the folder disappeared. How do I get them back? How to remove or eject this drive safely? So, Please suggest! Console output: Read-only file system. For the record, I was also not able to sudo echo to the file, permission was denied. Yet I could sudo emacs to edit it, or sudo su then enter the echo command as su.

Here the part of the source code from http: Based on instructions on: Now the system is not detecting the hdd at all. Any help please? I followed the exact steps on OS X Yosemite and my disk got corrupted and needed a reformat. Good thing I had taken a backup a moment ago. Hi, It worked perfectly for me, but I miss not having the original icon on my desktop. Also, you should enfatize that you have to enter previously the code sudo -s for making all this work. Anything else.

Popular Topics

Thanks for this information, works perfectly in mi iMac inch, Mid with Yosemite OS X Yosemite Please help! I can also report, using Yosemite, no method in this discussion so far has turned out to be effective. UDF maybe? Hey, I tried this and it worked for me. This is ridiculous. Yet another example of Apple abusing its customers — trying to get them to buy only Apple compatible products at higher prices. Apple is not selling anything in relation to what file format you use. Paragon have software you can buy that makes NTFS write seemless.

I could not get this to work. If there is output beging with sudo for exx.: Just fire this command, it asks You about root password. Name required. Mail will not be published required. Hard drives advertised as being compatible with Windows and Mac OS may have misled you into thinking you could actually use one hard drive for both computers. Here's a look at how the different HD format types function:. According to the list above, formatting your hard drive to FAT32 so that you can read and write on either OS seems like the obvious solution. The video and directions below will guide you through the process, but before you format your HD to FAT32, beware of these drawbacks:.

macOS Sierra - How to read / write / format NTFS drive on mac

The good news is, it's not FAT32 or nothing. The alternative solutions do require more tinkering, but if you do not want to risk FAT32's lack of security, choose from one of the following alternatives. Option 1: If you keep your hard drive's out-of-the-box NTFS format for all the reasons FAT32 displeases, there's a workaround that will allow your Mac to read and write files to the drive. However, it is an open-source program, so use it at your own risk. Many have vouched for its success, but others complain about bugs. The commercial solution, which will give you access to support and software updates, is Paragon NTFS.

Option 2: Here's how:. Then, select your hard drive from the left sidebar. Now go to the Erase tab. Then, click Erase at the bottom to format the drive. Please note that this will complete erase the drive. Any data you want to keep on that drive must be backed up elsewhere first.

The best ways to format an external drive for Windows and Mac - CNET

This is an open-source program, so use it at your own risk. Alternatively, you can opt for paid software like MacDrive instead. Option 3: No exchange or ref for opened boxes. But God I found you! Thank you sooo much! Another free way to do it - Download Ubuntu Linux, burn to a DVD or put on a flash memory , boot from that - you can run Ubuntu without installing it.

Ubuntu will see the Mac device as well as your Windows devices, and you can easily copy files from one to the other. Some of these programs cant access files if they are in "core storage". In fact the laptop doesn't even see the drive at all when I plug it in. Can a "seagate for mac" slim drive be formatted NTFS not fat 32 and used with windows 10 for external backup drive? This program is not working and you can't remove it from your computer! I've distrusted Paragon's filesystem code for years.

It seemed to work OK for about a month, but then suddenly after writing a file under Windows, the entire EXT3 filesystem became unreadable! Creating robust filesystem drivers is hard. Given the high risk of data loss, extensive testing is necessary before a filesystem driver can be deemed trustworthy, and it doesn't look like Paragon's testing is up to the task. This exact thing happened to me as well. I am in the process of reinstalling s of GBs of programs right now.

The help is an equally useless small bit of text. To examine and edit Apple. FAT32 has a size limit of around 4GB, so you can't put any files over that on there. But ExFat is legally-encumbered so that anyone who tries to write a Linux driver for it is subject to a nasty lawsuit from Microsoft. FAT32 is the only filesystem I know of that can be both read and written under all three major operating systems Windows, OS-X, and Linux as well as by various special purpose devices like digital cameras. It's unfortunate that FAT32 is an archaic design and has some serious limitations, but if your files are smaller than 4 GB and the partition containing your filesystem is under 2 TB, FAT32 provides portability between OS's that no other filesystem can.

For the record, The Paragon app won't let you run the free trial any more. What gives?? All I can access is the help menu, which ain't helpful at all! MacDrive no longer allows access to Mac drives during the evaluation period How we are supposed to evaluate it without actually evaluating it is beyond my little brain. All I have to check to see if the drive is actually bad is a Windows 7 x64 machine as her Air sure won't help. After two supposed hard drive failures in 3 months I'm a bit suspicious of the SATA controller or cabling.

After I pulled the drive, I decided to plug into my test PC and the firmware updated fine and the disk management utility sees 3 healthy partitions, but I can't read them without one of the products mentioned in this thread. It sounds like MacDrive is the one I need, but seek confirmation as I do intend to purchase the product that best suits. After trialling the free version and finding it appeared to do what I wanted it to do and did it reasonably well and simply, I thought I'd do the right thing purchased a license.

So far, after 2 weeks, I'm still waiting for a response to my request for help from Paragon and it seems I could be waiting a while. Apparently, irrespective of the fact I have purchased a license, because I didn't also purchase a 'support package' I've gone on a 'no guarantee' waiting list while those who purchased a support package get preferential treatment. Doesn't Paragon understand any person who goes to the effort of purchasing a license expects sufficient technical support to at least get what was purchased working.

But apparently not. Further it seems some customers are more important that others. So, my strong recommendation is, 'think 2 or 3 times about when you want the application to work before you purchase. So if you dont want to buy a Windows machine just to maintain your portable drives, dont use Microsoft formats. I once had to prepare files for a non-profit client using windows XP. I instructed them to use the update for ExFat and prepared an ExFat drive to mail them original high quality HD video files on. It all went well until I realized some characters are illegal in ExFat and that made for a lot of initial problems.

Once I removed any character like: